General Service - $119

23 Point bicycle safety and service schedule

Recommended every 3-6 months

 

Service Inspection

Please allow 10-15 minutes at check in for a Service Inspection of your bicycle to discuss the needs of your service, provide further recommendations and agree on service recommendations to be performed. 

Express Check Ins

Express Check Ins are available with other staff or when you do not have enough time available to cover the Service Inspection.  This can lead to services delays as we will have to call with assessment feedback and and agree on service recommendations to be performed.

Technical Evaluations

A Technical Evaluation and quote will be provided if your technician identifies functional or component deficienes preventing them from completing your bicycle service to the agreed standard of safety and performance. No additional work will be carried out until you have approved the quote.

 

Service details

Frame | Inspected for damage and wiped clean


Fork | Inspected for damage and wiped clean


Headset | Checked for smoothness and top cap tensioned


Stem | Bolts checked and torqued to factory settings


Handlebars | Checked for damage and wear


Tape | Checked for damage, wear, hygeine – new finishing tape applied


Front Brake | Pads and callipers checked for wear, aligned, cable tensioned, pivots lubricated


Rear Brake | Pads and callipers checked for wear, aligned, cable tensioned, pivots lubricated


Inner cables | Checked for length, wear, corrosion and smoothness


Outer cables | Checked for length, corrosion, damage and smoothness


Front Derailleur | Inspected, aligned, spring tension checked and cable tensioned


Rear Derailleur | Inspected, aligned, spring tension and jockey wheels checked and cable tensioned


Shift Levers | Inspected, aligned, bolts checked and shift mechanisms cleaned and checked for functional operation and smoothness.


Cassette | Checked for wear and lock ring tightened


Chain | Checked for wear, length, direction and stiff links, wiped and lubricated


Crankset | Inspected for damage, chain rings and bolts checked for wear and bottom braked bearings smoothness and wear checked.


Pedals | Removed, pedal axle threads regreased and tightened


Front Wheel | Hubs, rims and spokes cleaned, checked for wear, damage and corrosion, aligned and tensioned with Centrimaster including report


Rear Wheel | Hubs, rims and spokes cleaned, checked for wear, damage and corrosion, aligned and tensioned with Centrimaster including report


Tyres | Checked for wear, damage and tread direction and inflated


Saddle | Inspected for wear, rails and shell inspected, position marked with tape


Seatpost | Inspected for wear, damage, bolts torqued to factory setting, height position marked with tape, grease or carbon paste checked.


Seat Binder | Bolts and clamp inspected for wear, corrosion and tolerance and torqued to factory settings


 

Di2 – Battery charged and firmware updated

Service price doesn not cover additional installations such as chains, bar tape, brake pads